AB-GM100-900Y Domestic Gas Meter bollard suitable for domestic purposes (e.g. for houses and other residential environments) gas meter protection.
Specifically for domestic purposes (e.g. for houses and other residential environments) to minimise the bollards intrusion aesthetics appearance but whilst still performing and having the following characteristics.
Specifically designed to be backfilled with concrete, as required additionally to the already fitted at the head, reflective 3M warning safety tape, these bollards come with a specific designed stainless steel cap, which fits (held in place by additional caulking) on the head of the bollard, after the concrete backfilling operation has been completed.
This bollard was designed to protect gas meters. Finished in powder coated yellow, our gas meter bollard is sub-surfaced installed to energy providers specification.
Australian Bollards Gas Meter Bollard, is aesthetically pleasing and constructed from heavy duty, high strength galvanised steel, in either grey or yellow powder coated finish, with a linished finished stainless steel cap, all these surface and sub-surface bollards, are specifically designed to be backfilled with concrete, as required and comes with a brand reflective safety tape for night visibility.
Additionally to the already fitted reflective 3M warning safety tape at the head, these bollards come with a specific designed stainless steel cap, which fits (held in place by additional caulking) on the head of the bollard, after the concrete backfilling operation has been completed.
This concrete backfilling feature, is to provide additional protective strength and inertia resistance, to the specific nature of the asset requiring protection.
Our bollard is manufactured for installation as a protective barrier, which is typically found in instances around gas meters or at building corners that are beside or within a vehicle traffic lane, to have secure lateral protection in place.
If your gas meter is located less than 1 meter from your driveway, a permanent bollard must be installed to prevent any physical damage to the meter, to meet standard gas meter regulations.
Our Gas Meter Bollard complies with gas providers regulations such as (but not limited to):
- - Multinet Gas
- - AGL Energy
- - Energy Australia
- - Origin Energy
Located as typically determined in instances as a requirement for adequate protection, for meter installations as determined by the service/utility provider, for meter’s is in driveways, parkways or high-traffic area where it could be damaged.
In these instances, as in accordance with the relevant applicable acts, regulations and standards such as (but not limited to) the:
- Gas Act 1997
- Gas Regulations 2012
- Energy Products (Safety and Efficiency) Act 2000
- Energy Products (Safety and Efficiency) Regulations 2012
- Energy Products (Safety and Efficiency) Proclamation 2012
- Plumbers, Gas Fitters and Electricians Act 1995
- Australian Standards for gas
- Gas installation standard AS/NZS 5601
- Gas appliances standard AS 45XX Series
- Gas infrastructure standards AS/NZS 4645
- Gas supply standard AS 4564 (natural gas)
- Commercial propane and butane for heating purposes AS 4670 (LP gas).
- OHS Act 2004
- Environment Protection Act 1970
- OHS Regulations 2007
- Compliance Codes
- Australian Standards (AS)
- Codes of Practice
- Industry Standards
- WORKSAFE Guidance Notes
And or as determined by State and local building codes and utility providers, in accordance with those relevant applicable acts, regulations and standards and best industry practice, have specific regulations regarding placement of protection bollards, to ensure gas meters and pressure regulators are properly maintained and protected from damage or interference.
Always consult your local building department/ utility provider to ensure legal compliance with these regulations, to determine the placement/adequacy for of these bollards (protective barrier).
Caution should be exercised when installing bollards near existing underground utilities. Always call Dial before You Dig prior to any excavation works.
FREE! Written quote, specific to your needs.
FREE! Quick and easy, over the phone advice.
FREE! Down loadable specifications and drawings.
ENQUIRE TODAY! Credit cards, EFT welcome, Fast delivery and installation for both single & bulk orders Australia Wide.
We Make! We Stock! We Supply! We Deliver! We Install! We Maintain!
Welcome to Australian Bollards, aesthetically pleasing architecturally designed, functional, high quality, strong and durable, “One Stop Shop” comprehensive range of products.
That provides you with the perfect economic and cost-effective, must have budget solution, for your specific needs. Our Bollards are designed to protect Infrastructure, traffic management, car parking system & asset protection.
We design, manufacture, stock, install, deliver and maintain our bollards, to exacting specifications.
With complete attention to detail, to provide excellent protection, for personal, business commercial and or Federal, State or local council assets and security.
Since its inception in 1992, in excess of 22 years the Australian Bollards team, has successfully been providing a wealth of knowledge and expertise, guiding many thousands of customers on the correct bollard selections, appropriate to their specific projects applications.
Our Australian made and developed bollards, have come a long way from the simple rigid post construction of yesteryear and are ideal for a wide range of environments, application, uses and duty type options, in all Australia wide conditions.
Our company prides itself in being innovative and solutions orientated Australian based manufacturer, working with Australia’s largest commercial and government authorities, providing services which range from bollards, handrails and general engineering services, to building maintenance from our experienced team, all over the country over the past twenty-three years, based on our two word philosophy of “Service & Quality”
They are all manufactured and installed, by our expertly trained and experienced professional installers.
Whether it be for:
Pedestrian & Vehicle Control Bollards
Medium Duty “Energy Absorbing” Control Bollard
Vehicle No Parking & No Entry Control Bollards
Medium or Heavy Duty “Energy Absorbing” Control Bollard
Property & Asset Protection Bollards
Heavy Duty “Energy Absorbing” Protecting Bollard
Security & Defence Bollards
High Duty “Impact Attack” Defence Bollard
Types of bollards:
In a range of application and locations from:
We also manufacture and supply:
- - Access Control System Housing stands for keypads, Intercoms, HID, Proximity, Swipe and Smart Card Readers.
- - Car park safe and secure over car bonnet storage box cabinet lockers.
- - Handrails.
- - Steel staircases.
- - Structural beams.
- - Bike Racks.
- - Bike hoops.
- - Speed Humps.
- - Wheel Stops.
- - Boom gates.
- - Security fencing.
- - Variable Rate Boards.
- - Convex Mirrors.
- - Street furniture.